As Labour continues to plan on cutting benefits, a new National Institute of Economic & Social Research report concludes that the UK has one of the weakest social security 'safety nets' in the developed world... alongside a low-wage labour market, the economy ensures the poor stay poor. Now Labour plans to make that worse!
As Max Mosley, one of the reports author sums it up: 'We are neither delivering prosperity through high wages nor security through welfare'!
Good morning/afternoon/evening everyone. Hugs all round. Happy Thursday.
It looks like being a promising (if cold) day here today, which is a good thing for us as we have a family funeral to attend. We will also be seeing the nephew who got married last summer, & who has already walked out on his new wife to have an affair with someone he met at his job. We don't know what we will say to him - all our sympathies are with his poor wife. She is a lovely young woman and doesn't deserve this.
@AncTreat5358 Thank you. We can’t get our heads around it all. The next time we see the nephew will be Christmas. We want to tell him what an idiot he is, but it’s not our place to say it. That’s for his parents. He didn’t even try to stick around & make it work. He will be a bad bet for anyone, going forward. And yet - in so many other ways we couldn’t think of a nicer, kinder young man. It’s confusing…. They must have spent many thousands on their big flashy wedding , & are now saddled with the debt & no marriage to show for it. And it will take his poor wife a long time before she can trust anyone again.
Kyoto ware incense box in shape of crouching #rabbit with seal of Nonomura Ninsei (Japan, active c. 1646-77) Stoneware with enamels over clear glaze; H x W x D: 8.2 x 7.3 x 5.5 cm (3 1/4 x 2 7/8 x 2 3/16 in) Smithsonian National Museum of Asian Art F1904.203a-b asia.si.edu/explore-art-cultur… #JapaneseArt
Account got borked, only migration could save it... Partially anyways! ...maybe (🫳🪵 touch wood or tap a setto head)
But it's the same same Syndicate as you've known for 15 years, just a different URL. The internet is a Tibetan Sandmandala. We be drawing new ones, like we always have!
Boosts appreciated so we can reconnect with y'all!
No, that’s not a cosmic cone of shame—it’s NASA’s newest space telescope "SPHEREx is going to produce an enormous three-dimensional map of the entire night sky." arstechnica.com/science/2025/0…
"Joe Dominguez, CEO of Constellation Energy, talks about how a US trade war and tariffs could impact energy investments, deals in the energy sector, the future of power demand and the growth of nuclear power. He speaks with Bloomberg's Alix Steel at CERAWeek in Houston"
Joe Dominguez, CEO of Constellation Energy, talks about how a US trade war and tariffs could impact energy investments, deals in the energy sector, the futur...
A perfect example of good software. Enter email, enter password, welcome to federated encrypted chat messages. Simple. Easy adaptation too. Invite a friend using either a friendly invite URL (referral link) or Qr Code, they enter their email address, and password, done. This is easier to use than WhatsApp or Signal. It is called, Delta Chat, and it works with your own email. #WhatsApp #Signal #DeltaChat #Fediverse
The 1 thing I would change is when clicking on "new profile" is the option to use your own email, instead of signing up for a new Fedi provider, should be viewable right away, and not hidden under "other".
Make it transparent and obvious. It truly is the best feature. Keep this simple. You want someone's Grandma with zero technical skills to have this front and center.
You should make a proposal. If you see they need turning around maybe they see it too just don’t know how. They might be just desperate enough to accept your tenner.
WELL...in a surprising turn of events, I will own a brand new (paid, nothing weird) Bambulab X1 Carbon.
I won't be using it until February, but I wanted to enjoy the christmas discount (I know they have other discounts during the year, but now it was a good time to buy, rather than reaching february and discovering I have to wait until agust maybe?...)
I am finally able to take a look at *any* filament and it has become a very interesting world.
Apart from the particulars of Bambu's AMS and it's quirks, there's so much range to pick.
I will definitely aim to decode the AMS protocol and try some shenanigans (I understand it may probably be WAY out of my league, doesn't mean I can't tinker anyway)
I test an air fryer to see if it can dry filament.Models seen in the video: (Ams Lite Vertical Stand) https://makerworld.com/en/models/444925#profileId-3512...
I think I will try to get the AF140EU, rather than the AF100EU, even if the second one is sufficient, just because the second one looks fucking awful.
I would prefer if the AF140 was more square on all the edges, but still, it's better than the 100.
Altough I'll try to find a secondhand one first, I won't discard buying brand new, as I don't want to risk fucking up filaments that cost 100€ per Kg, for example.
Well, found a new AF140 at some discount (115€ instead of 130€) and I could pick it up in a shop near me, so no shipping cost, and I'm really tempted on jumping the gun.
My thought train is the following:
Cheap filament dryers cost between 40 and 70€, and they WON'T dry, or dry properly, PPA-CF, PAHT-CF, ASA, PC...as they all require at least 80ºC (PPA-CF requires 100-140ºC) So I will absolutely need to dry the filament and this will do it at the range I need.
I predict that at some point, someone, in china probably, is going to figure out that 3D printing needs proper filament dryers instead of the usual regurgitated small boxes with a heater, and commercially repurpose one of these to do it's thing, but look less like a kitchen appliance, and more like a workshop tool.
They could get rid of the non stick surface and just use stainless, for example.
I am unsure if the AMS will fit in the top shelf (and be able to swap spools, I mean) but I will try once I open the machine up.
Somehow I am pretty sure you can fit the printer itself between the legs of the Bekvam, if you remove the middle shelf. Definitely an interesting option if I ever had two printers.
Btw, the "filament dryer" was inserted from the side, but the pan can be removed normally.
Width wise, the AMS will fit no probs, but it won't particularly be able to open in any way.
What I do have space for os to install a sliding tray and put it on top so I can pull it out and do any changes I need. Now I need to investigate ways to do that. 😄
@vxo I am seriously pondering on adding a concrete pour inside the space just below the tabletop, to reduce possible resonances from the printer (apart from ordering some of those fancy dampener feet they sell)
It will be easy to add a few long screws on the sides so the concrete slab doesn't come crashing down on the AMS, and probably even add some corner spacers so it is still possible to tear it down later on.
Won't do it soon, so I have time think it out properly.
Well, I am NOT waiting 300+h to dry filament @ 70°C (amd the cheapo filament dryers don't even reliably reach that temp anyway, realistically it's more like 55°C
Ah, so it's a "too much space to go somewhere else" type of problem (that's the distributor).
If I had plenty of money, I would buy a second AMS to test sharp shape that reached well into the distributor gear to make the filament just have a single path to go.
Back int he day I made my Cetus be able to print TPU reliably by adding a small spacer-guide so I could avoid this exact problem.
Oh well, since I want to rebuild the complete AMS in a different way, that may not be a problem.
So @BambuLab said that TPU will not work with their AMS unit as it will get jammed and stuck in it. I wanted to know if it was a hard no or just a suggestion...
Well, finally got to add the concrete slab to the Bekvam table for the 3D printer.
I didn't want to go higher than the metal plates (for no particular reason, just an arbitrary decision), so it will not reach 25kg, probably being about 20 or so, wich is PLENTY for the intended purpose.
I was told to gently wet the surface with a sponge every 8h or so, to get the best finish and no cracks, I will try, not sure how will that go.
Any cement stains will be gently sanded once it's dry.
Today I finally weighed the Könkrete Bekväm, and it surprisingly got to 37kg. Taking into account that the wood in itself is about 9kg, that's a wooping 28kg of dampening mass.
I used 3,25L of water for the 25kg mix, of wich I left a sizeable amount in the flexy bucket, but all the secrews and wire should also add something, too.
I am happy to have reached the weight goal, tomorrow at mid day, I will turn it upside down and leave it be, as It will still be a while before I unbox the printer.
An ominous slab of concrete hangs over our heads 🤣.
The wood warped widthways a little. I knew that may happen but the cost of the screws was already high, so buying spray varnish to try to protect it was sort of out of the question. in any case, since the printer has four legs, the bend is not that critical anyway, there will still be four contact points underneath.
I may redo this table sometime in the future with some more thought, but for what I need it, it's good enough.
Well, well, well...seems my preparations timing was spot on!
Boss received the quote for six pieces at 250€, whereas I only want a 0,8mm hardened nozzle and will print them for free (boss buys the PPA-CF filament, ofc.) for less than the quote, he can get the 140 pieces we needed. 😄
So, I will be moving my computer and desk this friday and prepare the printer on saturday/sunday.
And I get a "free" day to do whatevs while the printer prints the test pieces.
Yesterday I realized I had no dryboxes left with spool carrier and filament output, since I'm a dumbass and I've been giving all them away 🤣😅
Since I needed one for this weekend, once I open the PPA-CF, I just updated one blank cover with leftover alu pieces. I didn't have any inox tubing, so I used some 10mm CF tube I had lying around.
Next time I will be taking a look at moving the aluminium supports down into the body itself, rather than have them in the cover, but for now, this will do.
Did a first print with PLA that came with the machine, it oozed from the nozzle like crazy, altough the print still looked good. I will try drying the filament with the FILAMENT DRYER, wich btw, only uses like 20W to mantain 55°C
Finally tested the filament dryer and I was pleased to see the heat distribution seems to be quite even. I also discovered that the drying option only allows 40-90°C, still plenty of range for mostly everything.
The device itself becomes noisier at night, I may try to balance the internal fan later on, but right now I need to dry the PPA-CF, so I took the whole thing out to the kitchen balcony floor, rather than leave it in the printer.
I am glad to see the machine is hotter than ambient temperature, but max temp on the outside is 35-40°C after 90 minutes.
I think next weekend I will bring a temperature datalogger from work to see how stable the whole thing actually is. I mean however bad it is, it is better than having NO dryer at all, or just a low temp dryer.
Numbers tell you that PPA-CF is incredibly stiff compared to normal PLA, but having always printed the latter, you are not mentally prepared to the shock of seeing it in person.
Remember I wanted to use my old 3D printer UPS for the X1C?
Well, that one is only good up to 450W, so the 1000W peak of heating the bed just shuts it down.
I had been thinking about getting a bigger model for the printer, but I wasn't seeing any good deals until today.
Just reserved this 1200W unit for 140€ shipped.
I will struggle this month with other monetary things, but since the day I got stuck in the elevator, and neighbors got fried appliances, I am wary of damaging the new printer.
The device supports the 1000W load inline (remember that the 450W one shut down like that) and the batteries almost hold the 1000W startup (only left them to charge for half an hour). It did perfectly hold while already started (unplugging it after everything was hot)
Just tested the UPS this morning after a good night of charge.
Started the printer and mid-bed heating (1000W) unplugged the thing. The thing started beeping like crazy, obviously, but did not shut down. I left it like that for a few seconds, but I had no need to know the endurance so I plugged it back again, and it went on.
I definitely feel a lot better having the whole thing protected. 😄
Well, today I had my first "major fix" of the printer (nothing broke, just weird behaviour of components).
Anyway, so the printhead has a cable chain and a single point attachment for the teflon tube, right?
The chain in itself has a bit of play, but not too much, UNLESS...unless you print with CF filaments that are hard as fuck, and their twist, especially when arriving at mid spool, is heavy.
It will pull down both the chain and tube, and it will start rubbing the carbon rod of the X axis.
At first I tried the simple fix of adding more zip ties, but I only made it worse, in fact, so much worse I even stopped working and dedicated myself to fix the issue, since I was printing parts for work anyway.
At first I tried using a simple 1 wall arc, printed with PPA-CF (sanded down to remove coarseness + adding a layer of kapton to prevent it from disintegrating the electrical cable in the chain.
However, that did not work that well, until I realized I could do this:
I see now a few other fixes around, but the nicest one ///requires a complete dissasembly of the cable, wich I don't really want to do./// CORRECTION: No, it doesn't. However I don't have nylon filament to try it either. I'll take a look at it in the future.
A friend asked about the fix, but I told them I'd show tomorrow, because late...however in the end I found myself having some free time, and I decided to redesign the piece for that extra bling and better fit.
So, this is the piece as it stood last time.
As you can see it was a tad too long and it made the end of the chain too straight, things I wanted to fix.
The AMS will be fully extraible for excellent access (no chance for the whole thing to topple, with the 20+kg of concrete in it)
I only need to find a carpenter with a rable saw that can cut this plywood into my required size.
That plywood has emotional value/attachment, so I want to use it, rather than get new one. I brought it with me from my old-old job, as a gift of sorts from my boss (can I take this? - "sure thing")
It has been used as table for years and I appreciate it.
In the end, I wasn't able to find somewhere I could carry the big panel to cut, so I ended buying some half decent 15mm plywood for this, because I could get it cut in the shop.
Also bought one ikea monitor riser so I can tuck the keyboard under it when I take out the laptop. Somehow I thought I remembered those being sold already varnished, and got surprised when I found out they weren't.
Just gave everything a varnish coat so tomorrow I can install it.
Everything is a spacer if you have enough copies of it.
The first supports are glued AND screwed down (I already removed the eccess glue, no worries). Then, attach the rails tho those (that had been previously drilled) and using the improvised spacers and double sided tape, adhere the top supports. Drill and remove the tape, then install back in place. Aply some glue to the top supports, fit the top then drill, countersunk and screw in place.
As per the monitor supports, I had bough some little feet for the left one, not realizing it would then make both parts sit flush, so I added one of the screws for that bit of extra safety (so it can't be pushed sideways and off the table).
Being able to hide the keyboard and mouse inder that feels really nice, altough I would really like to cut 30mm off of that depth, and maybe some form of aesthetic trim, but I have no wood router to try the latter.
@SaguaroLynx I wish I had the tools to build them myself, unfortunately I don't so I had to buy an ikea Vattenkar laptop stand, and just mount it in an unusual way.
I was gonna wait for the Biqu Glacier...until I saw a "new customer" discount that turned the build plate from 25€ (23€ with a small discount until 5th of April) down to 17€...and jumped on that.
Just registered with my work email, since I am ALREADY getting aliexpress spam, no idea how).
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 26) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 27) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 28) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 29) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 31) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 32) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 33) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 34) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari The Strongest Assassin Gets Transferred to Another World With His Whole Class (Chapter 74) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/364978 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari The Strongest Assassin Gets Transferred to Another World With His Whole Class (Chapter 75) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/364978 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari The Strongest Assassin Gets Transferred to Another World With His Whole Class (Chapter 78) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/364978 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Fantasy #Shounen
Einen Teil der starken Vortagesgewinne dürfte der DAX zum Handelsstart wieder verlieren. Das Gezerre um die US-Zollpolitik zwingt die Anleger zur Vorsicht. Sie scheuen das Risiko.
Ich will nicht kleinlich sein, aber WARUM? Wie kann ich so etwas machen, während ich auf der anderen Seite allen erzähle, dass ich sie von GAFAM befreien will. Es geht nicht in meinen Kopf. Oder habe ich was verpasst, hat sich das in den letzten 3 Monaten geändert. github.com/nextcloud/talk-andr… @nextcloud #unplugtrump
@rraggl Also ich gehe ganz sicher nicht in die Kneipe an der Hauptstraße, sondern suche mir welche in den Nebenstraßen oder in Richtung Alm. Irgendwie ein schlechtes Beispiel. Und es geht nicht um schwarz/weiß, sondern darum bestehende Alternativen zu nutzen. Vor allem durch die, die sich selbst als Alternative verstehen @jele @nextcloud
Meinst du mit warum, warum man die App vom PlayStore installieren soll oder warum in der F-Droid Version keine Push Notification funktioniert?
AFAIK gibt es für Push nur Googles proprietäre System FCM (Firebase Cloud Messaging). UnifiedPush (f-droid.org/2022/12/18/unified…) ist/war mal ein Versuch das zu lösen, ich weiss aber nicht wie der aktuelle Stand dazu ist. (Und vielleicht gehts eh schon damit. Wenn dazu jemand was genaueres weiß...)
A modern Android smartphone relies on a lot of services, from app stores andcalendars to messaging and push notifications. Most of them have openalternatives...
@jkirk Warum es keine Version OHNE Google Push gibt (wie z.B. der Mastodon Client, mit dem ich das hier schreibe) und warum das auf Github stattfindet. Ist sozusagen doppelt weird. @nextcloud
So wie ich das verstanden habe, gibt es eine Version ohne Google Push. Bzw anders ausgedrückt: wenn man die F-Droid-Version installiert, gibt es keine Push Notification: f-droid.org/packages/com.nextc… (Oder meinst du was anderes?)
Tja, und das Github-Thema ist sicher auch leichter gesagt als getan: 45 Contributors (allein bei Talk), CI/CD und fast 2000 Issues inkl. Historie zu migrieren ist sicher auch nicht ohne...
The classic LibreWorlf user. Admits that LibreWolf breaks this, and that, may not work here or there, but insist it is the best browser. 🤣 Folks, this is why Chromium won the browser wars. 😅
@Linux floorp is a nice browser, if somewhat needing a lot of tweaks. I use it as part of my isolated browsing system
Librewolf is my main personal browser and it hasn't really broken anything for me. I don't use it for streaming services or anything requiring DRM
There is 1 site that is buggy (canva) in librewolf (i use floorp for that) but everything else is fine so I don't know what people who have big problems with it are trying to do other than using DRM services
I still maintain that LibreWolf has a very specific target audience, and it's very good at what it does for that target audience.
Said target audience is, however, NOT the regular user who just wants to browse the web, but rather someone who absolutely requires to have the smallest online footprint possible, like journalists or people who might be in some danger lists.
Regular users who are privacy conscious but don't require that level of abstraction from the Web are, IMO, better served by other Firefox forks.
Saying that LibreWolf is well suited for everyone is a mistake, and will only hurt both LibreWolf and Firefox.
" Saying that LibreWolf is well suited for everyone is a mistake, and will only hurt both LibreWolf and Firefox. "
Except, the problem is, that is exactly what both LibreWolf and LibreWolf users, claim.
When I was a Firefox user (I use Vivaldi Browser, now), I absolutely hated LibreWolf. And my reasoning for hating LibreWolf was they only served to hurt, Firefox.
LibreWolf would break either something in the browser or over the most common websites (Facebook, Amazon, Google, etc.), and then blame Firefox. Meanwhile, their users would continuously insist that Firefox users, use LibreWolf. -- It always felt like they were trolling Firefox, since it came off like a snake, eating its tail.
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 30) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #
... show more
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 30) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #Drama #Fantasy #Harem #Psychological #Romance #SchoolLife #Shounen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 33 S1 END) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #
... show more
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 33 S1 END) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #Drama #Fantasy #Harem #Psychological #Romance #SchoolLife #Shounen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 32) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #
... show more
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 32) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #Drama #Fantasy #Harem #Psychological #Romance #SchoolLife #Shounen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 31) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #
... show more
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 31) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #Drama #Fantasy #Harem #Psychological #Romance #SchoolLife #Shounen #Tragedy
US-Demokraten wollen Übergangshaushalt im Senat blockieren
Den US-Demokraten bietet sich eine seltene Gelegenheit, ein Vorhaben der Republikaner zu stoppen. Offenbar wollen sie diese nutzen und den Übergangshaushalt blockieren - trotz der Sorge, für einen Shutdown verantwortlich gemacht zu werden.
Joseph James Johnothan (Any Pronouns)
Unknown parent • • •Joseph James Johnothan (Any Pronouns)
in reply to Joseph James Johnothan (Any Pronouns) • • •rar
in reply to Joseph James Johnothan (Any Pronouns) • • •Joseph James Johnothan (Any Pronouns)
in reply to rar • • •