No, that’s not a cosmic cone of shame—it’s NASA’s newest space telescope "SPHEREx is going to produce an enormous three-dimensional map of the entire night sky." arstechnica.com/science/2025/0…
WELL...in a surprising turn of events, I will own a brand new (paid, nothing weird) Bambulab X1 Carbon.
I won't be using it until February, but I wanted to enjoy the christmas discount (I know they have other discounts during the year, but now it was a good time to buy, rather than reaching february and discovering I have to wait until agust maybe?...)
I am finally able to take a look at *any* filament and it has become a very interesting world.
Apart from the particulars of Bambu's AMS and it's quirks, there's so much range to pick.
I will definitely aim to decode the AMS protocol and try some shenanigans (I understand it may probably be WAY out of my league, doesn't mean I can't tinker anyway)
I test an air fryer to see if it can dry filament.Models seen in the video: (Ams Lite Vertical Stand) https://makerworld.com/en/models/444925#profileId-3512...
I think I will try to get the AF140EU, rather than the AF100EU, even if the second one is sufficient, just because the second one looks fucking awful.
I would prefer if the AF140 was more square on all the edges, but still, it's better than the 100.
Altough I'll try to find a secondhand one first, I won't discard buying brand new, as I don't want to risk fucking up filaments that cost 100€ per Kg, for example.
Well, found a new AF140 at some discount (115€ instead of 130€) and I could pick it up in a shop near me, so no shipping cost, and I'm really tempted on jumping the gun.
My thought train is the following:
Cheap filament dryers cost between 40 and 70€, and they WON'T dry, or dry properly, PPA-CF, PAHT-CF, ASA, PC...as they all require at least 80ºC (PPA-CF requires 100-140ºC) So I will absolutely need to dry the filament and this will do it at the range I need.
I predict that at some point, someone, in china probably, is going to figure out that 3D printing needs proper filament dryers instead of the usual regurgitated small boxes with a heater, and commercially repurpose one of these to do it's thing, but look less like a kitchen appliance, and more like a workshop tool.
They could get rid of the non stick surface and just use stainless, for example.
I am unsure if the AMS will fit in the top shelf (and be able to swap spools, I mean) but I will try once I open the machine up.
Somehow I am pretty sure you can fit the printer itself between the legs of the Bekvam, if you remove the middle shelf. Definitely an interesting option if I ever had two printers.
Btw, the "filament dryer" was inserted from the side, but the pan can be removed normally.
Width wise, the AMS will fit no probs, but it won't particularly be able to open in any way.
What I do have space for os to install a sliding tray and put it on top so I can pull it out and do any changes I need. Now I need to investigate ways to do that. 😄
@vxo I am seriously pondering on adding a concrete pour inside the space just below the tabletop, to reduce possible resonances from the printer (apart from ordering some of those fancy dampener feet they sell)
It will be easy to add a few long screws on the sides so the concrete slab doesn't come crashing down on the AMS, and probably even add some corner spacers so it is still possible to tear it down later on.
Won't do it soon, so I have time think it out properly.
Well, I am NOT waiting 300+h to dry filament @ 70°C (amd the cheapo filament dryers don't even reliably reach that temp anyway, realistically it's more like 55°C
Ah, so it's a "too much space to go somewhere else" type of problem (that's the distributor).
If I had plenty of money, I would buy a second AMS to test sharp shape that reached well into the distributor gear to make the filament just have a single path to go.
Back int he day I made my Cetus be able to print TPU reliably by adding a small spacer-guide so I could avoid this exact problem.
Oh well, since I want to rebuild the complete AMS in a different way, that may not be a problem.
So @BambuLab said that TPU will not work with their AMS unit as it will get jammed and stuck in it. I wanted to know if it was a hard no or just a suggestion...
Well, finally got to add the concrete slab to the Bekvam table for the 3D printer.
I didn't want to go higher than the metal plates (for no particular reason, just an arbitrary decision), so it will not reach 25kg, probably being about 20 or so, wich is PLENTY for the intended purpose.
I was told to gently wet the surface with a sponge every 8h or so, to get the best finish and no cracks, I will try, not sure how will that go.
Any cement stains will be gently sanded once it's dry.
Today I finally weighed the Könkrete Bekväm, and it surprisingly got to 37kg. Taking into account that the wood in itself is about 9kg, that's a wooping 28kg of dampening mass.
I used 3,25L of water for the 25kg mix, of wich I left a sizeable amount in the flexy bucket, but all the secrews and wire should also add something, too.
I am happy to have reached the weight goal, tomorrow at mid day, I will turn it upside down and leave it be, as It will still be a while before I unbox the printer.
An ominous slab of concrete hangs over our heads 🤣.
The wood warped widthways a little. I knew that may happen but the cost of the screws was already high, so buying spray varnish to try to protect it was sort of out of the question. in any case, since the printer has four legs, the bend is not that critical anyway, there will still be four contact points underneath.
I may redo this table sometime in the future with some more thought, but for what I need it, it's good enough.
Well, well, well...seems my preparations timing was spot on!
Boss received the quote for six pieces at 250€, whereas I only want a 0,8mm hardened nozzle and will print them for free (boss buys the PPA-CF filament, ofc.) for less than the quote, he can get the 140 pieces we needed. 😄
So, I will be moving my computer and desk this friday and prepare the printer on saturday/sunday.
And I get a "free" day to do whatevs while the printer prints the test pieces.
Yesterday I realized I had no dryboxes left with spool carrier and filament output, since I'm a dumbass and I've been giving all them away 🤣😅
Since I needed one for this weekend, once I open the PPA-CF, I just updated one blank cover with leftover alu pieces. I didn't have any inox tubing, so I used some 10mm CF tube I had lying around.
Next time I will be taking a look at moving the aluminium supports down into the body itself, rather than have them in the cover, but for now, this will do.
Did a first print with PLA that came with the machine, it oozed from the nozzle like crazy, altough the print still looked good. I will try drying the filament with the FILAMENT DRYER, wich btw, only uses like 20W to mantain 55°C
Finally tested the filament dryer and I was pleased to see the heat distribution seems to be quite even. I also discovered that the drying option only allows 40-90°C, still plenty of range for mostly everything.
The device itself becomes noisier at night, I may try to balance the internal fan later on, but right now I need to dry the PPA-CF, so I took the whole thing out to the kitchen balcony floor, rather than leave it in the printer.
I am glad to see the machine is hotter than ambient temperature, but max temp on the outside is 35-40°C after 90 minutes.
I think next weekend I will bring a temperature datalogger from work to see how stable the whole thing actually is. I mean however bad it is, it is better than having NO dryer at all, or just a low temp dryer.
Numbers tell you that PPA-CF is incredibly stiff compared to normal PLA, but having always printed the latter, you are not mentally prepared to the shock of seeing it in person.
Remember I wanted to use my old 3D printer UPS for the X1C?
Well, that one is only good up to 450W, so the 1000W peak of heating the bed just shuts it down.
I had been thinking about getting a bigger model for the printer, but I wasn't seeing any good deals until today.
Just reserved this 1200W unit for 140€ shipped.
I will struggle this month with other monetary things, but since the day I got stuck in the elevator, and neighbors got fried appliances, I am wary of damaging the new printer.
The device supports the 1000W load inline (remember that the 450W one shut down like that) and the batteries almost hold the 1000W startup (only left them to charge for half an hour). It did perfectly hold while already started (unplugging it after everything was hot)
Just tested the UPS this morning after a good night of charge.
Started the printer and mid-bed heating (1000W) unplugged the thing. The thing started beeping like crazy, obviously, but did not shut down. I left it like that for a few seconds, but I had no need to know the endurance so I plugged it back again, and it went on.
I definitely feel a lot better having the whole thing protected. 😄
Well, today I had my first "major fix" of the printer (nothing broke, just weird behaviour of components).
Anyway, so the printhead has a cable chain and a single point attachment for the teflon tube, right?
The chain in itself has a bit of play, but not too much, UNLESS...unless you print with CF filaments that are hard as fuck, and their twist, especially when arriving at mid spool, is heavy.
It will pull down both the chain and tube, and it will start rubbing the carbon rod of the X axis.
At first I tried the simple fix of adding more zip ties, but I only made it worse, in fact, so much worse I even stopped working and dedicated myself to fix the issue, since I was printing parts for work anyway.
At first I tried using a simple 1 wall arc, printed with PPA-CF (sanded down to remove coarseness + adding a layer of kapton to prevent it from disintegrating the electrical cable in the chain.
However, that did not work that well, until I realized I could do this:
I see now a few other fixes around, but the nicest one ///requires a complete dissasembly of the cable, wich I don't really want to do./// CORRECTION: No, it doesn't. However I don't have nylon filament to try it either. I'll take a look at it in the future.
A friend asked about the fix, but I told them I'd show tomorrow, because late...however in the end I found myself having some free time, and I decided to redesign the piece for that extra bling and better fit.
So, this is the piece as it stood last time.
As you can see it was a tad too long and it made the end of the chain too straight, things I wanted to fix.
The AMS will be fully extraible for excellent access (no chance for the whole thing to topple, with the 20+kg of concrete in it)
I only need to find a carpenter with a rable saw that can cut this plywood into my required size.
That plywood has emotional value/attachment, so I want to use it, rather than get new one. I brought it with me from my old-old job, as a gift of sorts from my boss (can I take this? - "sure thing")
It has been used as table for years and I appreciate it.
In the end, I wasn't able to find somewhere I could carry the big panel to cut, so I ended buying some half decent 15mm plywood for this, because I could get it cut in the shop.
Also bought one ikea monitor riser so I can tuck the keyboard under it when I take out the laptop. Somehow I thought I remembered those being sold already varnished, and got surprised when I found out they weren't.
Just gave everything a varnish coat so tomorrow I can install it.
Everything is a spacer if you have enough copies of it.
The first supports are glued AND screwed down (I already removed the eccess glue, no worries). Then, attach the rails tho those (that had been previously drilled) and using the improvised spacers and double sided tape, adhere the top supports. Drill and remove the tape, then install back in place. Aply some glue to the top supports, fit the top then drill, countersunk and screw in place.
As per the monitor supports, I had bough some little feet for the left one, not realizing it would then make both parts sit flush, so I added one of the screws for that bit of extra safety (so it can't be pushed sideways and off the table).
Being able to hide the keyboard and mouse inder that feels really nice, altough I would really like to cut 30mm off of that depth, and maybe some form of aesthetic trim, but I have no wood router to try the latter.
@SaguaroLynx I wish I had the tools to build them myself, unfortunately I don't so I had to buy an ikea Vattenkar laptop stand, and just mount it in an unusual way.
I was gonna wait for the Biqu Glacier...until I saw a "new customer" discount that turned the build plate from 25€ (23€ with a small discount until 5th of April) down to 17€...and jumped on that.
Just registered with my work email, since I am ALREADY getting aliexpress spam, no idea how).
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 26) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 27) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 28) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 29) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 31) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 32) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 33) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 34) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 36) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 35) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 37) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 38) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 39) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 40) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari I’m a Max Level Regressor (Chapter 31) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/432038 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari The Strongest Assassin Gets Transferred to Another World With His Whole Class (Chapter 74) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/364978 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari The Strongest Assassin Gets Transferred to Another World With His Whole Class (Chapter 75) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/364978 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari The Strongest Assassin Gets Transferred to Another World With His Whole Class (Chapter 78) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/364978 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari The Strongest Assassin Gets Transferred to Another World With His Whole Class (Chapter 81) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/364978 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari The Strongest Assassin Gets Transferred to Another World With His Whole Class (Chapter 83) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/364978 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Fantasy #Shounen
Ich will nicht kleinlich sein, aber WARUM? Wie kann ich so etwas machen, während ich auf der anderen Seite allen erzähle, dass ich sie von GAFAM befreien will. Es geht nicht in meinen Kopf. Oder habe ich was verpasst, hat sich das in den letzten 3 Monaten geändert. github.com/nextcloud/talk-andr… @nextcloud #unplugtrump
@rraggl Also ich gehe ganz sicher nicht in die Kneipe an der Hauptstraße, sondern suche mir welche in den Nebenstraßen oder in Richtung Alm. Irgendwie ein schlechtes Beispiel. Und es geht nicht um schwarz/weiß, sondern darum bestehende Alternativen zu nutzen. Vor allem durch die, die sich selbst als Alternative verstehen @jele @nextcloud
Meinst du mit warum, warum man die App vom PlayStore installieren soll oder warum in der F-Droid Version keine Push Notification funktioniert?
AFAIK gibt es für Push nur Googles proprietäre System FCM (Firebase Cloud Messaging). UnifiedPush (f-droid.org/2022/12/18/unified…) ist/war mal ein Versuch das zu lösen, ich weiss aber nicht wie der aktuelle Stand dazu ist. (Und vielleicht gehts eh schon damit. Wenn dazu jemand was genaueres weiß...)
A modern Android smartphone relies on a lot of services, from app stores andcalendars to messaging and push notifications. Most of them have openalternatives...
@jkirk Warum es keine Version OHNE Google Push gibt (wie z.B. der Mastodon Client, mit dem ich das hier schreibe) und warum das auf Github stattfindet. Ist sozusagen doppelt weird. @nextcloud
So wie ich das verstanden habe, gibt es eine Version ohne Google Push. Bzw anders ausgedrückt: wenn man die F-Droid-Version installiert, gibt es keine Push Notification: f-droid.org/packages/com.nextc… (Oder meinst du was anderes?)
Tja, und das Github-Thema ist sicher auch leichter gesagt als getan: 45 Contributors (allein bei Talk), CI/CD und fast 2000 Issues inkl. Historie zu migrieren ist sicher auch nicht ohne...
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 30) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #Drama #Fantasy #Harem #Psychological #Romance #SchoolLife #Shounen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 33 S1 END) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #Drama #Fantasy #Harem #Psychological #Romance #SchoolLife #Shounen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 32) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #Drama #Fantasy #Harem #Psychological #Romance #SchoolLife #Shounen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Im the Hero but the Main Heroines Are Trying to Kill Me (Chapter 31) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/428521 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manga #Action #Adventure #Drama #Fantasy #Harem #Psychological #Romance #SchoolLife #Shounen #Tragedy
US-Demokraten wollen Übergangshaushalt im Senat blockieren
Den US-Demokraten bietet sich eine seltene Gelegenheit, ein Vorhaben der Republikaner zu stoppen. Offenbar wollen sie diese nutzen und den Übergangshaushalt blockieren - trotz der Sorge, für einen Shutdown verantwortlich gemacht zu werden.
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 22) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 23) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 24) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 27) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 29) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 28) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 30) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 34) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 33) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 36) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Night of the Soulless Heathens (Chapter 35) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/431097 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #Fantasy #Shounen
Had a blast at the Yamato Drummers of Japan performance tonight in Lone Tree, CO. They are absolutely fantastic musicians and performers. It brought me back to watching a #taiko ensemble perform at a festival in #Japan 20 years ago ❤️
Over 9 million American women over 40 develop eating disorders, often for the first time in midlife, defying stereotypes. An anthropologist and eating disorder survivor explains why older women with eating disorders often go unnoticed. buff.ly/1HGpnTp #anorexia #bulimia
Rachel Maddow shares video of Rep. John Larson channeling the outrage of his constituents at the anticipation that Donald Trump's top donor, Elon Musk, is in...
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 15) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 14) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 13) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 12) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 11) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 10) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 09) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 08) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 07) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 06) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 05) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 04) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 03) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 02) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 01) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 16) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 17) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 20) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 21) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 22) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 23) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 24) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Villain Classroom (Chapter 25) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/441094 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Drama #SchoolLife #Seinen #Tragedy
DiagROM is a diagnostic software that is burned into an EPROM by the user and then replaces the regular Kickstart ROM of an Amiga. The alpha version 2.0 has now been released at the title link.
At the same time, Domingo Fivoli has published a two-part German tutorial for the previous version 1.3 on his blog:
St. Croix is the largest of the US Virgin Islands in the Caribbean. It has wonderful beaches and the biggest cities are Christiansted and Frederiksted. What do you think of St. Croix? backpackandsnorkel.com/St-Croi…
Our Backpack and Snorkel St. Croix Travel Guide provides the best things to see on a cruise to St. Croix so that you can make memorable moments on a relaxing vacation in St. Croix. The highlights of St.
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 150) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 149) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 151) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 152) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 153) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 155) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 156) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 157) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 159) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 158) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 160) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
🔥 Pecinta Komik, Ini yang Kamu Tunggu! 🔥 Chapter terbaru dari Jungle Juice (Chapter 162) sudah hadir dalam Bahasa Indonesia! 🎉 📖 Gabung bersama ribuan pembaca lainnya dan nikmati kisah serunya. ✨ Jangan biarkan orang lain tahu kisah ini lebih dulu, baca sekarang dan rasakan sendiri keseruannya! 👉 Klik di sini untuk mulai membaca sekarang: e-komik.org/komik/168534 ⏳ Jadilah yang pertama tahu apa yang terjadi selanjutnya! #EKomik #Komik #Comic #Manhwa #Action #Fantasy #Horror #SciFi #Supernatural
I've always wondered how these cars ever passed any type of safety test. RIP to the students.
"The Highway Patrol’s investigation into a November Cybertruck crash in Piedmont where three college kids died is finding two very Tesla problems: the vehicle immediately caught fire, and its doors would not open."
I've never made an original meme, but I feel like this might be the one. I bequeath it to you, citizens of fedi who are awake when I am. I feel like it can be captioned, but it also works well as a response to things. #meme #memes
As someone with a form of EDS, I'm not a huge fan of abled people using our pain and disability as a meme. My body is literally coming apart at the joints. It's not a joke.
@abetterjulie It's tights. It's tights. I am not joking about any medical condition. It is an image used by a Chinese factory to sell tights. I don't even care about the image. I liked the caption.
the press should not have used the verb "deport" here. One cannot deport a national from her own country; that is banishing or exiling her. Stuff dictatorships do.
I know I love to gather my family together for the holiday traditions of thrmaKYGviG THANKKWSGINOEG Dy DaAy Day. We all sit around and think about all the things we're thrmaKYGviG for, then we tuck into a hearty meal of tukEkryY and SsuFtGvg with plenty of GvY and CnaaarbrrrrrrrrrERY sauce. Then we all get eaten by a giant rabbit, just like the Pilgrims did. Festive tiny fruits for all!
@sollat If it makes you feel better, I'm pretty sure the woman isn't generated by "AI." I think the way it works is they have a stock image of a model holding up a piece of fabric which they can chroma-key out and replace with whatever image they're trying to hawk. Photoshop actually has a feature now where you can even warp an image to make it fit a surface and then swap it out for another which will warp in the same way, making it look more realistic for things like fabrics; that's how a lot of marketing of custom designs is done. This doesn't look that sophisticated though.
But despite all that, extra knees... *shudder* Or even knees that bend backwards 😬😱
Perhaps every gardener to attempt to grow a tomato, lettuce, or bean has had to contend with animals trying to enjoy the food before the gardener themselves can, whether it’s a groundhog, rab…
“Tim Walz is headed back out on the road – this time, for a tour of House districts represented by Republicans who have stopped holding in-person town halls amid the raucous receptions some of their colleagues have gotten across the country.” cnn.com/2025/03/12/politics/ti…
Read my former colleague Ruth Marcus, explaining why she left the Washington Post
https://www.newyorker.com/news/essay/why-ruth-marcus-left-the-washington-post
"Black guys counting my money! I hate it. The only kind of people I want counting my money are short guys wearing yarmulkes every day. Those are the kind of people I want counting my money. No one else." = Donald Trump
In the Oval Office today, Donald Trump used “Palestinian” as a slur and said the highest-ranking Jewish elected official, Chuck Schumer, is “not Jewish.” Tho...
Festnahmen nach Krawallen bei Renten-Protest in Buenos Aires
Seit Wochen protestieren ältere Menschen in Argentinien wegen niedriger Renten. Nun eskalierte die Lage in Buenos Aires. Nach Krawallen, an denen Fußballfangruppen beteiligt waren, wurden mindestens 150 Menschen festgenommen.
Nikko is a popular tourist destination in the mountains north of #Tokyo . The town with a population of 84,000 formed around 2 temples that were built in 766 and 784. Read about the best things to see and do here. How do you like Nikko? backpackandsnorkel.com/Nikko/
Nikko is a popular tourist destination in the mountains north of Tokyo. We show you the best things to see in Nikko and, as always, we provide lots of photos so you can decide where you want to go.
Harry reports on outrage following Trump's intense attack on a top law firm–TALKING FEDS PODCAST is a roundtable discussion that brings together prominent fo...
Vladimir Putin does not typically dress in military fatigues, and the main reason for this, I can only assume, is that he looks absolutely terrible in them.
A German national (Jessica Brösche), a British national (Becky Burke), and now a Canadian national (Jasmine Mooney) have all been detained at the border and placed in ICE custody under dubious pretenses.
It is time for other nations to issue a travel warning to tourists headed to the US.
A Canadian entrepreneur detained by ICE is speaking out after she got arrested while trying to enter the San Diego border to obtain a visa last Monday.
That is a LOT of output cap! Unfortunately I'm better at switcher layout than schematic, but I don't see anything problematic, just wow what a lot of cap.
see alt text for further description, but as a quick summary: 12-24V in, 5.25V out, max output current 1.5A, operating current typically 500-700mA. designed for minimal EMI and noise. all downstream rails are generated from the 5V25 rail using high PSRR LDOs.
![A picture of a woman standing in front of a beige wall and a bed with a white quilt on it. She is holding up, covering most of her body and the bed, a blanket or tapestry on which is printed the image of three rabbits of wildly different sizes seated at a table. The smaller two are a gray and white rabbit sitting behind the table with its paw on the table and an almost orange-tabby-colored rabbit sitting on the table itself.
The largest, a white rabbit, appears to be eating a misshapen serving tray which is holding fruit of some kind which is far too small to be realistic. Other strange dishes are scattered around the tabletop, all of them holding a vague impression of fruit or perhaps vegetables. The dishes and the fruit/vegetables are out of proportion to all three rabbits and to each other.
Above this eerily idyllic scene, in brown letters of a font reminiscent of wood or branches perhaps, is printed (with apologies for my attempts at transcription, letter case as shown):
th[a glyph resembling a cross between an 'a', an 'm', and an 'r']K[a bizarre glyph looking like a 'Y' with an extra stem]GviG
THANKKWSGIN[two smeared glyphs of uncertain provenance]G Dy
DaAy Day
This image was obviously generated by "AI" even without the obvious tell of being unable to properly "hallucinate" text.](https://friendica.rogueproject.org/photo/preview/640/204905 "A picture of a woman standing in front of a beige wall and a bed with a white quilt on it. She is holding up, covering most of her body and the bed, a blanket or tapestry on which is printed the image of three rabbits of wildly different sizes seated at a table. The smaller two are a gray and white rabbit sitting behind the table with its paw on the table and an almost orange-tabby-colored rabbit sitting on the table itself.
The largest, a white rabbit, appears to be eating a misshapen serving tray which is holding fruit of some kind which is far too small to be realistic. Other strange dishes are scattered around the tabletop, all of them holding a vague impression of fruit or perhaps vegetables. The dishes and the fruit/vegetables are out of proportion to all three rabbits and to each other.
Above this eerily idyllic scene, in brown letters of a font reminiscent of wood or branches perhaps, is printed (with apologies for my attempts at transcription, letter case as shown):
th[a glyph resembling a cross between an 'a', an 'm', and an 'r']K[a bizarre glyph looking like a 'Y' with an extra stem]GviG
THANKKWSGIN[two smeared glyphs of uncertain provenance]G Dy
DaAy Day
This image was obviously generated by \"AI\" even without the obvious tell of being unable to properly \"hallucinate\" text.")
Nixie
in reply to Nixie • • •I am finally able to take a look at *any* filament and it has become a very interesting world.
Apart from the particulars of Bambu's AMS and it's quirks, there's so much range to pick.
I will definitely aim to decode the AMS protocol and try some shenanigans (I understand it may probably be WAY out of my league, doesn't mean I can't tinker anyway)
Nixie
in reply to Nixie • • •Well, if I want to have engineering filaments, I have to get way hotter than any cheap-ish drying solution.
There seems to be a trend on trying Air Fryers with "dehumidifying" setting on them.
Will have to give it a serious thought. I just wish they weren't so fucking ugly.
youtube.com/watch?v=u6RWsOP8BM…
I dried filament in an Air Fryer
YouTubeNixie
in reply to Nixie • • •I think I will try to get the AF140EU, rather than the AF100EU, even if the second one is sufficient, just because the second one looks fucking awful.
I would prefer if the AF140 was more square on all the edges, but still, it's better than the 100.
Altough I'll try to find a secondhand one first, I won't discard buying brand new, as I don't want to risk fucking up filaments that cost 100€ per Kg, for example.
Nixie
in reply to Nixie • • •Well, found a new AF140 at some discount (115€ instead of 130€) and I could pick it up in a shop near me, so no shipping cost, and I'm really tempted on jumping the gun.
My thought train is the following:
Cheap filament dryers cost between 40 and 70€, and they WON'T dry, or dry properly, PPA-CF, PAHT-CF, ASA, PC...as they all require at least 80ºC (PPA-CF requires 100-140ºC) So I will absolutely need to dry the filament and this will do it at the range I need.
Nah, fuck it, I'm buying it.
Nixie
in reply to Nixie • • •What if I do some good old research before actually buying it?
Just because my choice has more liters than the first one, doesn't mean it can actually fit a filament spool ^_^UU
DEPTH:
AF100: 95mm
AF140: 88mm
MAX DIAMETER:
AF100: 209mm
AF140: 222mm
Bambu wiki specifies spools that are 50-68mm in width by 197-202mm in diameter, so I can proceed with the purchase.
Nixie
in reply to Nixie • • •Also, on the aesthetic part of things, the 140 definitely looks way better and less...kitchen-y than the 100.
Plus it's about 85mm shorter. I wonder why the other one is so tall.
Well, it doesn't matter.
also, realized I will be able to dessicate silica gel beads with the same tool (that's no longer an appliance, don't you DARE), so that's a plus.
youtube.com/watch?v=vV8dOm2WH5…
Regenerate, Dry and Reuse Silica Beads Gel/Desiccant SUPER FAST With an Air Fryer!
YouTubeNixie
in reply to Nixie • • •I predict that at some point, someone, in china probably, is going to figure out that 3D printing needs proper filament dryers instead of the usual regurgitated small boxes with a heater, and commercially repurpose one of these to do it's thing, but look less like a kitchen appliance, and more like a workshop tool.
They could get rid of the non stick surface and just use stainless, for example.
(picture: AF100)
Nixie
in reply to Nixie • • •Also, I will never try to use the home oven for any of this. Lest the following happens.
I mean, I can always fuck up the controls and actually air fry the spool, but it won't have food in it later on.
Nixie
in reply to Nixie • • •Got the "filament dryer" 🤣
Bigger than expected, but that will fit nicely in the designated space.
Nixie
in reply to Nixie • • •There we go.
I am unsure if the AMS will fit in the top shelf (and be able to swap spools, I mean) but I will try once I open the machine up.
Somehow I am pretty sure you can fit the printer itself between the legs of the Bekvam, if you remove the middle shelf. Definitely an interesting option if I ever had two printers.
Btw, the "filament dryer" was inserted from the side, but the pan can be removed normally.
Nixie
in reply to Nixie • • •Width wise, the AMS will fit no probs, but it won't particularly be able to open in any way.
What I do have space for os to install a sliding tray and put it on top so I can pull it out and do any changes I need. Now I need to investigate ways to do that. 😄
Nixie
in reply to Nixie • • •@vxo I am seriously pondering on adding a concrete pour inside the space just below the tabletop, to reduce possible resonances from the printer (apart from ordering some of those fancy dampener feet they sell)
It will be easy to add a few long screws on the sides so the concrete slab doesn't come crashing down on the AMS, and probably even add some corner spacers so it is still possible to tear it down later on.
Won't do it soon, so I have time think it out properly.
Nixie
in reply to Nixie • • •Ahhh, these may be the slabs y'all been talking about.
That would probably work, but I think I prefer the embedded slab for that stealth look, xD
Nixie
in reply to Nixie • • •Why am I happy to have bought the Filament fryer?
Well, I am NOT waiting 300+h to dry filament @ 70°C (amd the cheapo filament dryers don't even reliably reach that temp anyway, realistically it's more like 55°C
Nixie
in reply to Nixie • • •Now that I am thinking more heavily about the X1C, my mind drifts into "let's modify a second AMS unit to actually handle abrasives.
First thing I'm looking into is how different are the filament paths between the AMS internal distributor vs the AMS Hub.
The distributor has tighter bends (plus the internal PTFE paths that are also quite sharp)
I wonder if the HUB, by using only the two central paths with the smoothest transitions, can actually handle abrasives altogether.
Nixie
in reply to Nixie • • •So far, If I understand it correctly, the AMS does the following:
Motor 1: both push and pull the filament, sense presence AND wind-unwind the spool.
Motor 2: push and pull filament as well as sense presence.
I wonder how exactly the ams also fails with rubber-like filaments, maybe it's a problem with many motors pushing and pulling on it?
Nixie
in reply to Nixie • • •Ah, so it's a "too much space to go somewhere else" type of problem (that's the distributor).
If I had plenty of money, I would buy a second AMS to test sharp shape that reached well into the distributor gear to make the filament just have a single path to go.
Back int he day I made my Cetus be able to print TPU reliably by adding a small spacer-guide so I could avoid this exact problem.
Oh well, since I want to rebuild the complete AMS in a different way, that may not be a problem.
Nixie
in reply to Nixie • • •Holy shit, the distributor is FUCKEN TINY!
I had not realized how small it was.
Definitely a ton of space after the gear, before entering the PTFE guide tube, waaaay too much (I guess for reliability?)
Nixie
in reply to Nixie • • •Aham
So, it seems the problem is mostly when retracting?
I will definitely have to buy a second AMS to tinker with and build some weird contraption that uses the parts, but feeds the filament differently.
youtube.com/watch?v=VklIM9maye…
How to unjam filament in AMS unit of Bambu Lab X1 Carbon
YouTubeNixie
in reply to Nixie • • •Well, finally got to add the concrete slab to the Bekvam table for the 3D printer.
I didn't want to go higher than the metal plates (for no particular reason, just an arbitrary decision), so it will not reach 25kg, probably being about 20 or so, wich is PLENTY for the intended purpose.
I was told to gently wet the surface with a sponge every 8h or so, to get the best finish and no cracks, I will try, not sure how will that go.
Any cement stains will be gently sanded once it's dry.
Nixie
in reply to Nixie • • •Today I finally weighed the Könkrete Bekväm, and it surprisingly got to 37kg. Taking into account that the wood in itself is about 9kg, that's a wooping 28kg of dampening mass.
I used 3,25L of water for the 25kg mix, of wich I left a sizeable amount in the flexy bucket, but all the secrews and wire should also add something, too.
I am happy to have reached the weight goal, tomorrow at mid day, I will turn it upside down and leave it be, as It will still be a while before I unbox the printer.
Nixie
in reply to Nixie • • •An ominous slab of concrete hangs over our heads 🤣.
The wood warped widthways a little. I knew that may happen but the cost of the screws was already high, so buying spray varnish to try to protect it was sort of out of the question. in any case, since the printer has four legs, the bend is not that critical anyway, there will still be four contact points underneath.
I may redo this table sometime in the future with some more thought, but for what I need it, it's good enough.
Nixie
in reply to Nixie • • •Btw, I think I fucked up my calculations for the mass and it's really 18Kg, not 28.
In hindsigh it makes more sense, given the amount I left in the flexybucket.
Oh well, It is still a very good mass for dampening.
I will doublecheck next weekend, tho.
Nixie
in reply to Nixie • • •Well, well, well...seems my preparations timing was spot on!
Boss received the quote for six pieces at 250€, whereas I only want a 0,8mm hardened nozzle and will print them for free (boss buys the PPA-CF filament, ofc.) for less than the quote, he can get the 140 pieces we needed. 😄
So, I will be moving my computer and desk this friday and prepare the printer on saturday/sunday.
And I get a "free" day to do whatevs while the printer prints the test pieces.
Heh.
Nixie
in reply to Nixie • • •IT IS TIME.
i won't be documenting all the process, just enjoy it.
Nixie
in reply to Nixie • • •Nixie
in reply to Nixie • • •Nixie
in reply to Nixie • • •Nixie
in reply to Nixie • • •Yesterday I realized I had no dryboxes left with spool carrier and filament output, since I'm a dumbass and I've been giving all them away 🤣😅
Since I needed one for this weekend, once I open the PPA-CF, I just updated one blank cover with leftover alu pieces. I didn't have any inox tubing, so I used some 10mm CF tube I had lying around.
Next time I will be taking a look at moving the aluminium supports down into the body itself, rather than have them in the cover, but for now, this will do.
Nixie
in reply to Nixie • • •I will try drying the filament with the FILAMENT DRYER, wich btw, only uses like 20W to mantain 55°C
Nixie
in reply to Nixie • • •Finally tested the filament dryer and I was pleased to see the heat distribution seems to be quite even.
I also discovered that the drying option only allows 40-90°C, still plenty of range for mostly everything.
The device itself becomes noisier at night, I may try to balance the internal fan later on, but right now I need to dry the PPA-CF, so I took the whole thing out to the kitchen balcony floor, rather than leave it in the printer.
Nixie
in reply to Nixie • • •I am glad to see the machine is hotter than ambient temperature, but max temp on the outside is 35-40°C after 90 minutes.
I think next weekend I will bring a temperature datalogger from work to see how stable the whole thing actually is.
I mean however bad it is, it is better than having NO dryer at all, or just a low temp dryer.
Nixie
in reply to Nixie • • •Numbers tell you that PPA-CF is incredibly stiff compared to normal PLA, but having always printed the latter, you are not mentally prepared to the shock of seeing it in person.
Can't wait to do some shenanigans with it.
Nixie
in reply to Nixie • • •Remember I wanted to use my old 3D printer UPS for the X1C?
Well, that one is only good up to 450W, so the 1000W peak of heating the bed just shuts it down.
I had been thinking about getting a bigger model for the printer, but I wasn't seeing any good deals until today.
Just reserved this 1200W unit for 140€ shipped.
I will struggle this month with other monetary things, but since the day I got stuck in the elevator, and neighbors got fried appliances, I am wary of damaging the new printer.
Nixie
in reply to Nixie • • •There we go.
The device supports the 1000W load inline (remember that the 450W one shut down like that) and the batteries almost hold the 1000W startup (only left them to charge for half an hour). It did perfectly hold while already started (unplugging it after everything was hot)
Nixie
in reply to Nixie • • •Just tested the UPS this morning after a good night of charge.
Started the printer and mid-bed heating (1000W) unplugged the thing. The thing started beeping like crazy, obviously, but did not shut down. I left it like that for a few seconds, but I had no need to know the endurance so I plugged it back again, and it went on.
I definitely feel a lot better having the whole thing protected. 😄
Nixie
in reply to Nixie • • •There is an extra benefit I hadn't realized from having an UPS for the 3D printer:
Not having to worry about power cuts during firmware updates.
Nixie
in reply to Nixie • • •Well, today I had my first "major fix" of the printer (nothing broke, just weird behaviour of components).
Anyway, so the printhead has a cable chain and a single point attachment for the teflon tube, right?
The chain in itself has a bit of play, but not too much, UNLESS...unless you print with CF filaments that are hard as fuck, and their twist, especially when arriving at mid spool, is heavy.
It will pull down both the chain and tube, and it will start rubbing the carbon rod of the X axis.
Nixie
in reply to Nixie • • •At first I tried the simple fix of adding more zip ties, but I only made it worse, in fact, so much worse I even stopped working and dedicated myself to fix the issue, since I was printing parts for work anyway.
At first I tried using a simple 1 wall arc, printed with PPA-CF (sanded down to remove coarseness + adding a layer of kapton to prevent it from disintegrating the electrical cable in the chain.
However, that did not work that well, until I realized I could do this:
Nixie
in reply to Nixie • • •And here it is, working.
youtube.com/watch?v=26B5oKTLHY…
I see now a few other fixes around, but the nicest one ///requires a complete dissasembly of the cable, wich I don't really want to do./// CORRECTION: No, it doesn't. However I don't have nylon filament to try it either. I'll take a look at it in the future.
makerworld.com/es/models/65428…
Improve Cable Chain Sagging Cable Head by SKY-UP
makerworld.comNixie
in reply to Nixie • • •A friend asked about the fix, but I told them I'd show tomorrow, because late...however in the end I found myself having some free time, and I decided to redesign the piece for that extra bling and better fit.
So, this is the piece as it stood last time.
As you can see it was a tad too long and it made the end of the chain too straight, things I wanted to fix.
Nixie
in reply to Nixie • • •But how where you going to fix that?
Well...I don't have two 3D scanners for nothing, do I?? It was about time I had real use for them.
With the piece taken out, I propped the chain with something I had lying around and then took a scan off of it.
Nixie
in reply to Nixie • • •Then it was a bit of Fusion time:
Adding the twist after making the piece flat was tricky, took me a while to figure out the sweep WITH twist.
But there it is.
Nixie
in reply to Nixie • • •There we go.
The AMS will be fully extraible for excellent access (no chance for the whole thing to topple, with the 20+kg of concrete in it)
I only need to find a carpenter with a rable saw that can cut this plywood into my required size.
That plywood has emotional value/attachment, so I want to use it, rather than get new one. I brought it with me from my old-old job, as a gift of sorts from my boss (can I take this? - "sure thing")
It has been used as table for years and I appreciate it.
Peter
in reply to Nixie • • •🙋 Not a carpenter here, just a guy who moved into an old house that needed lots of care and owns a jobsite table saw as a result.
If you're anywhere near Southeastern PA, US - reach out.
Regardless, watching this thread progress has been cool. Keep up the awesome.
Nixie
in reply to Peter • • •Peter
in reply to Nixie • • •😆
Yeah, I suppose even meeting halfway would be... problematic 🚣.
Be well!
Nixie
in reply to Nixie • • •In the end, I wasn't able to find somewhere I could carry the big panel to cut, so I ended buying some half decent 15mm plywood for this, because I could get it cut in the shop.
Also bought one ikea monitor riser so I can tuck the keyboard under it when I take out the laptop. Somehow I thought I remembered those being sold already varnished, and got surprised when I found out they weren't.
Just gave everything a varnish coat so tomorrow I can install it.
Nixie
in reply to Nixie • • •Everything is a spacer if you have enough copies of it.
The first supports are glued AND screwed down (I already removed the eccess glue, no worries).
Then, attach the rails tho those (that had been previously drilled) and using the improvised spacers and double sided tape, adhere the top supports.
Drill and remove the tape, then install back in place.
Aply some glue to the top supports, fit the top then drill, countersunk and screw in place.
This shit ain't going anywhere.
Nixie
in reply to Nixie • • •I'm really glad I used a thinner plywood. After finishing the install, there were about 5mm of clearance between the top part and the AMS.
I may end up adding a front cover, even if just for the aesthetics of it.
youtube.com/watch?v=BHvYN1Xvps…
30 de marzo de 2025
YouTubeNixie
in reply to Nixie • • •As per the monitor supports, I had bough some little feet for the left one, not realizing it would then make both parts sit flush, so I added one of the screws for that bit of extra safety (so it can't be pushed sideways and off the table).
Being able to hide the keyboard and mouse inder that feels really nice, altough I would really like to cut 30mm off of that depth, and maybe some form of aesthetic trim, but I have no wood router to try the latter.
It's good enough for now, tho.
Saguaro Lynx
in reply to Nixie • • •Ooh, nice risers!! 8- o
I like the bent-wood look & the light-colored grain!
And connecting the two makes a sturdy work & storage area!
8- )
Nixie
in reply to Saguaro Lynx • • •Nixie
in reply to Nixie • • •There we go!
Got the 0,6 and 0,2mm nozzles plus the long AMS cable.
Now I have all the sizes and will be able to extract the full potential of the machine...once I can afford cool filaments, that is.
🤣🤣
Nixie
in reply to Nixie • • •I was gonna wait for the Biqu Glacier...until I saw a "new customer" discount that turned the build plate from 25€ (23€ with a small discount until 5th of April) down to 17€...and jumped on that.
Just registered with my work email, since I am ALREADY getting aliexpress spam, no idea how).